«UralForest» — is one of the leading plants for the production of 0.4-35kW power transmission line poles and communication lines. High quality products, 10-year warranty
The factory has been in operation since 1959
Durable Ural timber
By all means of transport anywhere in the Russian Federation and the world
Company production
Wooden transmission line poles with lengths of 6 to 13 metres in classes L, M, S.
Can make supports to your dimensions from 1 M.
Quality that has stood the test of time
Ural Timber Company (formerly Serov Energosokombinat) is a manufacturer of wooden transmission line supports and communication lines made of high-quality timber from the Urals. The company, founded in 1959, was the largest producer of supports within the USSR Ministry of Energy with a production volume of 150,000/m³ of transmission line supports per year.
In addition to its main products, the Serov Energia woodworking plant was the largest supplier of carpentry products.
The production process, which has been fine-tuned over the years, makes it possible to produce products that meet the requirements of GOST. The production capacity of the plant is up to 50,000 m3 of wooden power transmission poles per year.
The products are certified by the Senezh Research and Production Laboratory for Wood Protection. The quality management system is certified according to ISO 9001:2015
A multi-stage inspection system at every stage of production - from incoming raw materials to finished products. A regulated process for selecting reliable suppliers.
Proximity of highways and railway station, own railway siding, availability of river port in Perm. Delivery of supports to any region of Russia and the world.
OPTIMAL CHOICE
Nordic pine overhead line supports are recommended for use by RAO UES as the best solution for reconstructing obsolete power lines and constructing new ones.
major differences
Expert judgement
GOST 9463-2016 (Round coniferous timber - Technical conditions);
GOST 20022.6-93 ("Wood protection. Impregnation methods");
GOST 20022.0-93 ("Wood protection. Protection parameters");
International Standard BS 1990-1:1984.
TU 02.20.11-001-96502166-2019.
The right technological process step by step
We use the time-honoured Soviet production technology to manufacture the supports. The material is northern pine, which has a denser and less porous structure than species growing in the Russian midlands.
Antiseptic
GTC
The wood raw material is carefully inspected for rot and cracks.
A 7-metre support must be able to withstand a load of at least 350H applied at 0.6m from the top (carried out prior to impregnation with antiseptic).
The impregnation depth is checked with a core sampler. The minimum impregnation depth is at least 85% of the sapwood width. In practice, up to 100% of the sapwood is impregnated. The impregnation process data (temperature, pressure) and the control data obtained shall be recorded as the factory certificate for the given batch of poles.